1st steps in building

laying out the plywood involves a few preliminary measurements so that the hull panels can be transferred from the plans to the wood. Measure very carefully, in this case you will see from the photos that a 4X8 sheet is actually a little bigger.  I like using the imperial/metric tape measure as the plans are in feet-eighths-inches, but the math is easier in centimeters.

From vireo

Start by laying out a 12X12 grid, you will discover the real size of your panel

















transfer the lines from the plan to the panel. Work slowly and carefully, measure and remeasure. if it looks wrong, it is!

From vireo

circle the marks clearly where the brads for the bending batten will be placed.

From vireo

1 hour later - this panel was fully laid out and ready to
cut.

Get a plywood cutting blade for the circular saw. From vireo

 

Related Posts by Categories