A Flow Coat

Woo-Hoo!!!!

Greg finally decided to do something different. After months (yes, months!) of sanding and fairing, Greg decided that enough is enough. We flow coated the boat yesterday. When I went over there, I was expecting another round of sanding and fairing, so I didnt take the camera. (Like Ive said countless times, there are only so many sanding and fairing pics I can take.)

One of our concerns was epoxy runs. In order to address this, we thickened the epoxy ever so slightly with just a touch of wood flower. It seems to have worked, but we wont know for sure until after the epoxy dries. Wish us luck.

Read More..

Almost There

Almost There
Originally uploaded by OzzyC.

I figured it was about time for another actual picture of our project. This photo really doesnt do the boat justice, but I wanted to show you something. Next time, Ill take the shot from the bow, and youll get a better idea of the boats overall shape and progress. (This shot makes the boat look more like a giant brick than an actual watercraft.)

What you should notice in this picture is just how sharp weve cut the chines, how flat the boat is, and how patchy the boat looks now. (If you click on the picture, you will see a larger picture, complete with notes on the boat.)

Along the chines, you will see something that looks a little like mold. Greg did a fog coat of black spraypaint. The idea here is to do a very light hand sanding with a long sanding block. After this sanding, we will be able to identify the low spots. These low spots will be easily seen because the fog coat of black spraypaint will remain in the low areas, whereas the paint will have been sanded from the higher areas.

Feel free to click here if youd like an idea of how things looked before we built up the chines.

Read More..