Video of the epoxy tray we made
Mixing the epoxy
Applying the epoxy sealer coat
Mixing the thickened epoxy (Peanut Butter)
Be careful after you lay the epoxy
After laying the sealer coat of unthickened epoxy to each surface to be glued, lay the thickened epoxy on one of the sealed surfaces with a trowel. After the thickened epoxy is applied, set the pieces together, weigh them down to ensure a good solid bond between the surfaces, and apply a couple of screws to hold the surfaces together. We specifically recommend the weighting and screwing process, as if you dont weight them down, you may not get a nice tight fit. If you dont screw the pieces together, the epoxy can act as a lubricant between the fitted pieces between when the surfaces are laid together, and when the epoxy sets. The result is that you can end up with the pieces sliding a little, and the fit of the boards is not as precise. You can remove the screws after the epoxy has dried.
0 komentar:
Posting Komentar